A garage door is composed of many different moving parts that work in unison to keep the door in good working condition. Here are some steps you can follow when you notice something wrong or have questions about how to maintain your garage door.
1. Inspect for a broken spring
A garage door is opened and closed by a series of springs that wind up when the door closes. There are two types of springs: torsion and extension. The ideal situation would be if you had both springs on your door. If you have a single broken spring, the garage door opener will struggle to lift the door. You may also hear a loud popping noise when the door opens and closes.
2. Inspect for loose screws or bolts
One of the easiest ways to keep your garage door functioning properly is to regularly check all of the screws and bolts. The garage door is the largest moving object in your home; if one of them falls out, it can be very dangerous . Make sure that all of the screws and bolts are tight on both the opener and closer. You may also want to check for any loose or missing rollers.
3. Check if the safety sensors are working
The safety sensors are located at the bottom of the door and are responsible for preventing the door from closing on something or someone. If they are not working, it could cause an injury. To test them, place a piece of wood (or any other obstruction) in the path of the door so that it will not close. The garage door opener should stop and reverse. If this does not happen, the safety sensors are malfunctioning and need to be repaired or replaced.
4. Check if there is a problem with the switch
In order for your garage door opener to open and close the door, you have to press a button at least once every 40 seconds or so. If you notice that your garage door is staying down after about ten seconds, the switch may be malfunctioning. It could, however, just need to be reset. This can usually be done by pressing a button on the wall or remote control.
5. Lift up the garage door
Lastly, you should always inspect the garage door itself for any physical damage. The tracks should be straight and clean, and there should not be any rust or corrosion. If you do see any damage, it is best to call a professional to have it repaired before it becomes worse.
Regularly following these simple tips can help keep your garage door in good working condition and help prevent any major problems in the future. If you do experience any problems, be sure to contact a qualified technician right away.